How long can I wear my WETClear face mask for?

The WETClear™ mask may be used until the filters becomes soiled, damaged, or difficult to breathe through, after which the mask should be disposed of, or wiped clean and the filters replaced. It is recommended that this be done after ten total hours of wear.

What if my mask fogs?

The mask interior and exterior can be gently wiped clean with a soft, dry tissue. Avoid wiping or wetting the filters themselves. The mask interior is treated with an anti-fog coating. Anti-fog coating spray can be ordered from here for renewing this coating. If moisture accumulates in the mask, it can be wiped away with a soft tissue.

How do I renew the anti-fog?

Clean inside of clear plastic with soft dry or damp tissue. Apply light spray onto inside of clear plastic. Avoid spraying filter pads. Polish surface with soft tissue until dry and shiny. Anti-fogging spray contains water, isopropyl alcohol, trace amounts of fog-resisting elements. Anti-fog coating spray can be ordered here. Spray anti-fogging agent only in well ventilated area; avoid direct contact with eyes, as it is an eye irritant. In case of eye contact, flush eyes with fresh water for minimum of fifteen minutes. Contact physician if irritation persists. Keep anti-fogging agent out of reach of children. Do not ingest.

How do I replace the filters?


Peel and discard old pads; spray inside of clear plastic with anti-fogging agent; buff; apply new filter pads with their built in adhesive rings.

Who is WETClear best suited for?

WETClear is ideal for educators, medical and healthcare workers and those who are deaf, hard of hearing or rely on visual communication. WETClear is the ultimate clear face mask for personal virus protection. Our transparent, see-through mask lets us see each others full faces and expressions while enhancing communication and connection by allowing for facial recognition and lip reading. WETClear allows you to be protected by a mask without hiding your face.

What is the WETClear face mask made of?

The WETClear face mask is made of clear PET-G plastic. The WETClear face mask filters are made from Technostat® 70 Plus, a viral and bacterial filtering fabric blended from spunbond polypropylene.




How do I assemble my shield?

How do I clean and dry my shield?

For cleaning use:
Rubbing alcohol 70% or higher
Glass cleaner
Warm soapy water
Then dry with soft lint-free cloth

Avoid the following:
Dropping and scratching
Hair dryer
Solvent or acid
Dishwasher
Microwave oven
Washing machine

How do I lift up my shield so it remains up?

To lift up the shield, detach clear shield from center button and rotate upward until it clicks.

How do I make the shield fit snugly?

For a snug fit, loop elastic band around two back hooks.

How do WET's shields compare to other shields?

The WETShield is lightweight, easy to clean and disinfect. There is no foam, so sweat and oils are not trapped and absorbed into the SHIELD.
The shield extends above the band for added protection.

Can I buy replacement shield parts?

We offer the clear shield part in packs of 2 and 5, click here.

What is the shield made of?

Polypropylene (PP), 0.015” Polycarbonate (PC), Natural Rubber.
Latex-Free • Non–sterile

Does the shield come in different sizes?

The WETShield comes in three sizes, Full, Youth and Toddler. The Full size shield fits comfortably on the heads of adults as well as children over the age of ten. The Youth size shield fits comfortably on the heads of children between five and ten years old. The Toddler size fits on the heads of children approximately three to four years old.

The wearer, parent or guardian is responsible for ensuring that the shield is worn properly and covers and extends at least two inches below the individuals full face.

Comparing sizes and measurements

face shield sizes compareThe Full size WETShield is 10.25 inches tall, 7.5 inches wide at the top and 9 inches wide at the bottom.
This shield size is intended for individuals eleven and older. Please ensure that the shield is worn properly and covers and extends at least two inches below the individuals full face. 

The Youth size WETShield is 9 inches tall, 7.5 inches wide at the top and 9 inches wide at the bottom.
This youth shield size is intended for children between five and ten years old. The parent or guardian is responsible for ensuring that the shield is worn properly and covers and extends at least two inches below the child’s full face. 

The Toddler size WETShield is 7.25 inches tall, 7.5 inches wide at the top and 9 inches wide at the bottom.
This toddler face shield size is intended for children approximately three and four years old. The parent or guardian is responsible for ensuring that the shield is worn properly and covers and extends at least two inches below the child’s full face. The Toddler face shield is not designed to lift up.

How do I attached my topper to my WETShield?

How do I assemble my Shield Plus with fabric drape?

The WETShield+PLUS was created to provide extra protection. The drape is meant to be tucked into the neckline of a shirt.

How do I wash and dry my Shield Plus fabric drape?

Buttons are permanently affixed to drape. Do not remove buttons from drape. Hand-wash and air-dry or machine wash cold in mesh garment bag and cool air dry, or tumble dry low. Do not bleach.

Has this product been approved by the FDA?

This product has not been approved by the FDA. Product has been authorized by FDA under an EUA for use by healthcare providers as personal protective equipment. Product is only authorized for the duration of the declaration that circumstances justifying the authorization of emergency use under Section 564(b)(1) of the Act, 21 USC 360bbb-3(b)(1) unless the authorization is terminated or revoked sooner.Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

Our shields are not a replacement for medical grade/approved Personal Protective Equipment, and in circumstances where medical grade/approved Personal Protective Equipment is recommended, you should consult a health care professional. The decision to use shields is solely your own. Our shields are not “medical” items or devices or approved Personal Protective Equipment. Our shields do not replace a particulate filtering N95 or any other NIOSH or FDA certified masks or medical shields used in healthcare or other settings and should not be used when caring for those with COVID-19.

Please remember that use of shields is not intended to replace other recommended measures to stop the spread of COVID-19, such as wearing masks, social distancing, washing your hands and refraining from touching your face. Follow the latest advice of the CDC and your own health care professionals as to how best to keep yourself safe.

What does the shield protect me from?

The WETShield offers personal protection against contamination from splashes, sprays, and spatter of body fluids. Its full-height, wrap-around design protects the wearer's entire face, while providing unobstructed views with no perceptible distortion. Made of lightweight, hard surface components, the shield is easy to clean and comfortable to wear daily. It gives an ideal protection for activities involving a high level of human interface, from the medical sector, to the retail and service sector.

This product has not been approved by the FDA.

Can I buy bulk orders?

We sell our face shields to businesses, organizations and foundations.
For inquiries on bulk orders please contact us 800.938.1190 or submit an order inquiry